Thinklogical VelocityKVM-24, Быстрый старт

Страница: 7 / 13

QUICK START GUIDE
STEP 5: If desired, connect your optional local
keyboard & mouse by inserting the PS/2 or USB HID
connectors into the
VelocityKVM Transmitter’s
local
devices receptacles and connect the optional local DVI
displays
to the Transmitter’s DVI OUT Ports
1 & 2.
Ensure all system functions are operating properly.
USB HID or PS2
Keyboard/Mouse
QUICK START GUIDE
Velocitykvm-24
Velocity kvm-24
Multi-Mode Fiber Extension System
–
DVI Two Display
Multi-Mode Fiber Extension System
–
DVI Two Display
3
1 4
Local DVI OUT
1
DVI OUT 2 DDC
USB 2.0 Option
Audio IN/OUT
Stereo 3
-D
USB 2.0 Option
Audio OUT ►
DVI IN 1
STEP 1: Connect the 3 Multi-Mode Fiber Optic Cables
between the Transmitter and Receiver units (up to 1000
meters) as shown.
Audio
◄IN
PS/2 Keyboard
PS/2 Mouse
USB HID (Kybd/Mouse)
USB 1.1 (Kybd/Mouse)
Stereo Emitter IN
* STEP 2: Ensure that
the POWER ON/OFF
switch is in the OFF
position (0) on both the
Tx and Rx units.
Connect the supplied
AC Power Cords to
both units and plug
each into a standard
AC supply. Turn both
switches ON (1).
DVI OUT 1 DDC
STEP 4: Connect the DVI and KVM cables between the
Source CPU and the VelocityKVM Transmitter using
the cables supplied in KIT-000005-R. Ensure the CPU is
turned ON.
STEP 3: Connect the destination DVI and KVM devices
to the VelocityKVM Receiver using standard cables.
Ensure the devices are turned ON.
2
VELOCITY-24_Manual_QSG
Source CPU
DVI IN 2
Local DVI OUT
2
5
Fiber-Optic Cables:
L1: Data Tx to Rx and Video 1
L2: Data Rx to Tx
L3: Video 2
STEP 2: *
USB HID or PS2 Keyboard/Mouse
5
7
Extend Distribute Innovate