Thinklogical TXL24, Руководство по эксплуатации продукта

Страница: 6 / 43

Page vi
TLX24 Matrix Switch Product Manual
thinklogical
Rev. C, August, 2016
About this Product Manual
This product manual is divided into four sections: TLX System Features, Set-Up & Installation,
Regulatory & Safety Requirements and Thinklogical Support. These are sub-divided to help you find
the topics and procedures you are looking for. This manual also contains Appendices.
Section 1
– The TLX System Features
: Page 1 . Details the features and functions of your equipment.
Section 2
– Set-Up and Installation
: Page 14 . Contains all the requirements and procedures necessary
to connect and install your equipment, including FPGA upgrades.
Section 3
– Safety & Regulatory Requirements
: Page 23 . Thinklogical
®
strongly recommends that you
read this section prior to starting the hardware assembly.
Section 4
– Thinklogical
Support : Page 25 . Thinklogical provides the best customer support available.
If you have any questions or need to contact us for any reason, please refer to this section of the
manual.
Note and Warning Symbols
Throughout this manual you will notice certain symbols that bring your attention to important information.
These are
Notes and Warnings . Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation point
symbol, as shown here.
A note
is meant to call the reader’s attention to
helpful or important information at a point in the text
that is relevant to the subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red
stop sign, as shown here.
A warning
is meant to call the reader’s attention to
critical information at a point in the text that is
relevant to the subject being discussed.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!
Class 1 Laser Information
The TL X24, like all Thinklogical
®
products, is designed and identified as a Class 1 LASER product.
This means the maximum permissible exposure (MPE) cannot be exceeded when viewing the laser
with the naked eye or with the aid of typical magnifying optics (e.g. telescope or microscope).
CLASS 1 LASERS do not require any special
precautions under conditions of normal use.
SFP
Modules
Fiber-Optic
Cables
Class 1 Lasers