SDI to HDMI Converter, Rev. C
9
July, 2012
MAIN MENU:
A:
Set Input Select
Note
:
A valid input must be applied in order for the configuration to be used.
a:
Single Link Input
This option forces a re-configure of the unit. A valid signal needs to be present.
b:
Enable Loop Output
This will enable the video signal applied to input 1 to be looped back out of the
IEX3. This is enabled as default.
c:
Disable Loop Output
Turns off the BNC Loop output 1.
d:
AUTO mode ON
Detects when a video source has changed format. On cable insertion, the unit
performs a re-configuration of the last known output setting with the new input.
e:
AUTO Mode OFF
Turns off the AUTO mode.
MAIN MENU:
B:
Set Output Select
Sets the output video resolution. A valid input video signal needs to be present.
a:
480p @ 60
b:
576p @ 50
c:
720p @ 50
d:
720p @ 60
e:
1080p @ 50
f:
1080p @ 60 (default)
g:
1920x1200p @ 60
MAIN MENU:
C:
Video Processing Setup
a:
Comp. Artifact Reducer
Selects menu for Component Artifact Reducer (CAR) video processing functions.
b:
DeInterlacer
Selects the menus for the DeInterlacer (DEINT) video processing functions.
c:
Noise Reducer
Selects the menus for the Noise Reduction (NR) video processing functions.
d:
Picture Control
Selects the menus for Picture Control (PC) video processing functions.
e:
Edge Enhancer
Selects the menus for Edge Enhancement (EE) video processing functions.
f:
Color Management Unit
Selects menus for Color Management Unit (CMU) video processing functions.