Thinklogical DCS StudioPRO, Руководство по эксплуатации продукта

Страница: 18 / 28

MAN-000018 12 REVISION A
3.4. LED Status
3.4.1. Transmitter
LED Label Status
DDC Pass LED is ON (solid green) for DDC Pass thru mode. In this mode, the CPU
communicates directly with the connected monitor for DDC information.
DDC Dynamic LED is ON (solid green) for DDC Dynamic mode. In this mode, the DDC of
the monitor is read from the receiver and stored in the transmitter.
DDC Static LED is ON (solid green) for DDC Static mode. In this mode the DDC
information in the transmitter is not changed regardless of changes made
at the receiver end.
Power LED is ON (solid green) when power is connected
USB Link Shows the status of the connection
LED is ON (solid green) when the Power, device port(s), and Fibers are
properly connected
LED is BLINKING (blinking green) when the Fibers are properly connected
and until the Host enumerates
Host LED is ON (solid green) when the computer establishes a USB connection.
3.4.2. Receiver
LED Label Status
USB 1,2,3,4 LED is ON (solid green) when a device is connected to the
corresponding USB device port.
Video
(Single-Link Version Only)
LED is ON (solid green) when a DVI signal is properly established.
Video SL
(Dual-Link Version Only)
LED is ON (solid green) when a Single-Link DVI signal is properly
established.
Video DL
(Dual-Link Version Only)
LED is ON (solid green) when a Dual-Link DVI signal is properly
established.
DDC Pass LED is ON (solid green) for DDC Pass thru mode. In this mode, the
CPU communicates directly with the connected monitor for DDC
information.
DDC Dynamic LED is ON (solid green) for DDC Dynamic mode. In this mode, the
DDC of the monitor is read from the receiver and stored in the
transmitter.
DDC Static LED is ON (solid green) for DDC Static mode. In this mode the DDC
information in the transmitter is not changed regardless of changes
made at the receiver end.
Power LED is ON (solid green) when power is connected
USB Link Shows the status of the connection
LED is ON (solid green) when the Power, device port(s), and Fiber are
properly connected
LED is BLINKING (blinking green) when the Fiber are properly
connected and until the Host enumerates