Thinklabs UNIBOARD V1.1 Скачать руководство пользователя страница 22

Страница: 22 / 129

ThinkLABS

Software Installation

Software Installations for Linux OS

The procedure that we are discussing for U

manager. Hence you need to have an internet connection in place before you begin with this.

of *.deb or *.rpm packages of the listed software and install it on your system.

The following section describes t

Text Editor (Gedit Editor)

The Gedit (text editor) might be installed already on your system, since it’s the default text editor provided

by the distribution. If you find that it is missing you can follow the below mentioned steps.

Installing Gedit Editor:

STEP 1:

Open terminal and type: “sudo aptitude install gedit” and press enter

Page

129

Software Installations

s for Linux OS

The procedure that we are discussing for Ubuntu Linux involves downloading packages through the synaptic

manager. Hence you need to have an internet connection in place before you begin with this.

of *.deb or *.rpm packages of the listed software and install it on your system.

following section describes the installation of the software packages on Ubuntu Linux

(Gedit Editor)

The Gedit (text editor) might be installed already on your system, since it’s the default text editor provided

d that it is missing you can follow the below mentioned steps.

Open terminal and type: “sudo aptitude install gedit” and press enter

http://thinklabs.in

Linux involves downloading packages through the synaptic

manager. Hence you need to have an internet connection in place before you begin with this. If not get hold

on Ubuntu Linux.

The Gedit (text editor) might be installed already on your system, since it’s the default text editor provided

d that it is missing you can follow the below mentioned steps.

Содержание UNIBOARD V1.1


































































































































Результаты поиска

Содержание UNIBOARD V1.1

Отзывы:

Thinklabs UNIBOARD V1.1, Руководство пользователя, Страница: 22 / 129

Результаты поиска

Содержание UNIBOARD V1.1

Отзывы: