Thinkkitchen Robot culinaire, Инструкция по эксплуатации

Страница: 22 / 28

22
1. Slot the hole in the cutter over the cen-
ter post on the cutter disc. Then slot in
the small tab on one end of the cutter
under the edge of the slot.
2. Push the other end of the cutter down
until it locks in place.
IMPORTANT: Always ensure the food
processor is not connected to mains pow-
er before assembling or disassembling it.
Slot the bowl onto the base as shown.
Rotate the bowl clockwise until the raised
section on the base of the bowl is aligned
with the padlock symbol on the base.
The bowl is now locked on the base.
NOTE: The food processor will not func-
tion if the bowl is not aligned properly
with the lock symbol.
3. Slot the cutter disc onto the top of the
drive shaft.
4. Slot the lid onto the top of the bowl as
shown.