Installation Instructions:
The unit should be removed from the box and mounted on a metal plate for heat
dissipation. The power supply should be also mounted on a metal plate for heat
dissipation. Coax connectors should be attached and ran to an antenna of 11.5
dBi gain or less. Connection to the network can take place in a serial or parallel
manner. All pertinent I/O can also now be connected. The unit should now be
connected to power and power can be monitored using the status lights on the
reader.
The unit should not be allowed to be at full power and continuously “on” for over
30 minutes at a time. Continuous operation in the “on” condition at full power can
decrease the useful life of the unit.
The unit has been type accepted at temperatures between -20 and plus 50
degrees C. Operation at temperatures above 35 degrees C without air circulation
and a heat sink is not recommended.
Model Number ALR-9900
Model Number ALR-9900
