1. IMPORTANT INFORMATION
3
1.1 Excavator Battery Installation
●
Turn the Excavator over so that you can gain access to the underside of the vehicle.
●
Making sure that the Power switch is in the OFF position, remove the screw from the
battery cover and remove the battery compartment cover.
●
Insert 4x AA batteries (supplied) into the battery compartment observing the correct
polarity as indicated.
●
Re-fit the battery cover and secure with the screw.
(Warning - Remove the batteries if the Excavator is not going to be used for a long time.)
1.2 Remote Battery Installation
●
The battery compartment is located on the
underside of the controller.
●
Remove the screw from the battery cover and
remove the battery compartment cover.
●
Insert 2 AA batteries (supplied) into the battery
compartment observing the correct polarity as
shown.
●
Re-fit the battery cover and secure with the
screw.
WARNING
Do not mix old and new batteries.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in a fire.
Remove the batteries if the Excavator is not going to
be used for a long time.
Requires 4x AA Batteries (Included)
Requires 2x AA Batteries
(Included)
