AAA
AAA
BATTERY INSTALLATION:
2 x 1.5v AAA or R03
IMPORTANT BATTERY INFORMATION:
1. Always follow the instructions carefully. Use only batteries specified and be sure to insert
them correctly by matching the + and – polarity markings.
2. Remove batteries if product is not to be played with for a long time.
3. Do not mix old batteries and new batteries, or standard (carbon-zinc) with alkaline batteries.
4. Remove exhausted or dead batteries from the product.
5. Do not short-circuit the supply terminals.
6. NON-RECHARGABLE BATTERIES ARE NOT TO BE RECHARGED.
7. Remove rechargeable batteries before recharging.
8. Only charge rechargeable batteries under adult supervision.
This Device complies with
21CFR part 1040.10 and 1040.11
Caution-use of controls or
adjustments or performance
of procedures other than those
specified herein may result in
hazardous radiation exposure.
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
1mW MAX OUPUT at 635-670 nm
CLASS II LASER PRODUCT
CAUTION
14
15
SUPER HARD • 33
SUPER HARD • 36
SUPER HARD • 39
SUPER HARD • 34
SUPER HARD • 37
SUPER HARD • 40
SUPER HARD • 35
SUPER HARD • 38
