TPMS
Product Parameters
Initial Use
Basic Operations
Working Principle
The working principle is shown in the following figure:
Screen
Resolution
Input voltage
Working current
Working Temperature
Storage Temperature
1.77 inches
168*128 pixel
5V
≤1A
32
℉
~122
℉
(0
℃
~50
℃
)
-4
℉
~140
℉
(-20
℃
~60
℃
)
RF (Radio Frequency)
Communication*
Vehicle
Bluetooth
Communication*
Diagnostic Tool
(Using TPMS module)
Charging
Plug one end of the charging cable into the charging port of the THINKTPMS G1, and the
other end to an external power adaptor, then connect the power adaptor to the AC outlet.
While being charged, the LED illuminates red. Once the LED changes into green, it
indicates the charging is complete.
Powering On/Off
Press the button for about 3 seconds to turn it on. A beep will sound and the screen
will light up.
Press the button for about 3 seconds to turn it off.
▲/▼ Switches to different tire positions.
Press it for about 3 seconds to turn it on/off.
Screen On: Press it once to enter hibernate mode.
If the device is not charged and there is no operation made for 30
minutes, it will automatically power off.
If the device is charging and there is no operation made for 5
minutes, it will automatically enter hibernate mode to conserve
battery power.
Screen Off (hibernate): Press it once to wake it up.
Press it to confirm the current operation.
OK
2
3
