Hydration Hose Routing: 34L and Pro 50L+ – Front Pocket
1. Fill reservoir and place in the front pocket. Use the
tether to hold the reservoir in place
2. Guide the tube through the passthrough slot on the
left side of the front pocket
3a.
34L
– Guide the tube through the pass through slot
on the left side of the main compartment and down
the shoulder straps. Secure with elastic straps and
adjust to a convenient length.
3b.
Pro
50L+
– Guide the tube along the outside of
the bag and down the shoulder straps. Secure with
elastic straps and adjust to a convenient length.
Hydration Hose Routing Pro 50L+ – Side Pocket
1. Fill reservoir and place in the side hydration pocket.
Use the tether to hold your reservoir in place
2. Guide the tube through the pass through slot and
down the shoulder straps. Secure with elastic straps
and adjust to a convenient length.
Rain Cover Attachment – Backpack
1. Locate the larger rain cover and orient the logo on the
top of the bag and wrap around top corners. If a tripod
is attached to your bag, slide the tripod legs through
the hook and loop slot on the bottom of the rain cover.
2. Remove the belt pack from the rotation compartment
3. Attach the three tabs to the inside of the rotation
compartment
4. Wrap elastic band around sliding buckle
5. Tighten up the rain cover around the edges of the
backpack
Rain Cover Attachment – Belt Pack
Easier to do when wearing the pack
1. Wrap smaller rain cover over belt pack with the logo
on the front of the pack
2. Be sure the buckle receptacle is not covered
Rain Cover - Care
If the rain cover gets dirty, soak it in cold water (no
soap) and hang to dry.
Waterproofing: Water repellant should be reapplied
to the exterior of the backpack and rain cover every
6 months. We recommend Nikwax: Tent & Gear
Solarproof
