Stowaway Infrared Wireless Keyboard Owner’s Manual Page 15
Frequently Asked Questions and Answers
Q: What should I do when I type on the keyboard and nothing
happens?
•
Check that Pocket PC device’s batteries are charged.
•
Check the keyboard’s two AAA batteries.
•
Check to make sure that your Pocket PC device is properly connected
to the keyboard by repositioning the IR wand to point at the IR port of
your Pocket PC device.
•
Check to make sure that the keyboard software is installed properly
according to the instructions.
•
Check the Config tab of the Keyboard Control Panel to make sure
you’ve selected the appropriate keyboard type. After tapping
“Enable”, you should select “Infrared wireless keyboard”.
•
Check the IR tab of the Keyboard Control Panel to make sure the
wireless keyboard is enabled.
•
Use the Keyboard Troubleshooter in the keyboard control panel
.
Q: Why can’t I synchronize my handheld when using the keyboard?
The Stowaway IR Wireless Keyboard does not replace your handheld
computer’s cradle. To synchronize, connect your handheld to the
synchronization cradle and then synchronize as usual. If your handheld
computer uses a synchronization cable, you may be able to leave the cable
connected while you type as long as it doesn’t interfere with the keyboard
easel and IR wand.
Q: Can I use my Stowaway IR Wireless Keyboard with other
handheld devices?
Yes. The Stowaway IR Wireless Keyboard, when combined with the
appropriate Stowaway software drivers, is designed to work with handheld
devices equipped with an IR port.
Q: How do I uninstall the keyboard driver?
Select Start
¼
Settings
¼
System
¼
Remove Programs. Select Stowaway
Keyboard Driver from the list of applications then tap the Remove button.
