2. MAINTENANCE & TROUBLESHOOTING
2.1 Care & Maintenance
4
●
Please ensure you follow the instructions when assembling.
●
Keep these instructions for reference.
●
Assemble with glue (included) when instructed.
●
Please take care when detaching parts as they are fragile.
●
Ensure parts are fixed firmly in place when assembling.
●
Keep away from exposure to direct sunlight for extended periods and keep away from
direct heat sources.
●
Do not drop on a hard surface or disassemble the unit.
●
Do not immerse in water.
If this does not resolve your issue. Please contact ThinkGizmos via email:
and we will endeavor to resolve your problem as quickly as possible.
2.3 Download Build Instructions
There should be build instructions contained within the box.
If for any reason you lose or misplace these instructions, they can be downloaded
again from the following web address:
https://bit.ly/3tLCf1j
3. PARTS AND BUILDING INSTRUCTIONS
1. PAGE HEADER
3.
Press P2 in firmly until all the way down
.
5a.
After assembly, fold back and forth several times carefully to loosen the hinge.
5b.
Slot the front of Part B6 into the biggest gap at front of Part B9.
6.
Tilt and squeeze one end and carefully slot through the gap.
9.
Pay attention to the front and rear position when placing the side panel.
11.
Lift the bonnet of the car to access the motor on off switch.
3.1 Additional Building Instructions
