10
7.6 Barometric Pressure Display
●
The current barometric pressure is automatically shown on the Weather Station once it
starts receiving readings.
●
The barometric pressure can be displayed in either HPA/INHG. Briefly press the
HPA/
INHG
button to switch between the modes.
●
If the barometric pressure reading is below the minimum range, then
LLLL
will be
displayed. If the barometric pressure reading is above the maximum range, then
HHHH
will be displayed.
7.7 Barometric Pressure History
The barometric pressure history for the previous 24 hours is shown on the graph under
the current pressure reading. It shows whether the reading was higher or lower than the
previous hours reading.
7.8 Relative Barometric Trend Display
After you insert the batteries, the weather station measures the current barometric
pressure. The trend display shows a neutral relative pressure course . The further
course of the trend display is determined as follows:
●
If, after an hour, the relative barometric pressure is higher than the value measured first,
then a positive course is displayed .
●
If, after an hour, the relative barometric pressure lower than the value measured first,
then a negative course is displayed .
●
If the relative barometric pressure does not change within an hour, the the upward
or downward pointing arrow becomes a horizontal arrow. The measured relative
barometric pressure is then taken as the neutral value from which further prognoses are
made.
7.5 Temperature / Humidity Trend Display
After you insert the batteries, the weather station measures the current temperature and
humidity. The trend display shows a neutral temperature/humidity course . The
further course of the trend display is determined as follows:
●
If, after an hour, the temperature/humidity is more than the value measured first, then a
positive course is displayed .
●
If, after an hour, the temperature/humidity is lower than the value measured first, then a
negative course is displayed .
●
If the temperature/humidity does not change within an hour, then the upward or
downward pointing arrow becomes a horizontal arrow. The measured temperature/
humidity is then taken as the neutral value from which further prognoses are made.
