Zappa Rail | Installation Guide
12
Measure out your rail spacing. Spacing
between rails are varied based on your
specific requirements.
Attach the End Bracket directly to the
strainer post at your desired height using the
nut and bolt provided.
Refer to installation tips on end assembly construction
Attach the Insulstrainer at the same height
as the End Bracket. Put nut and bolt
(not supplied) through the middle of the
Insulstrainer and fasten using four Tek
screws on each corner of the Insulstrainer.
1
2
What you will need:
What you will need:
Option Two
- Insulstrainer
Please Note:
Depending on the size and
type of post you will need to obtain a
nut and bolt to go through the post and
centre hole of the Insulstrainer
