background image

 

8

Declaration of conformity 
 

This appliance complies with the following European Directives: 

 
-73/23/EEC dated 19/02/1973 Low Voltage Directive. 
-89/336/EEC dated 03/05/1989 EMC Directive inclusive of 
Amending Directive 92/31/EEC. 
-93/68/EEC dated 22/07/1993 CE Marking Directive. 
-89/109/EEC dated 25/01/1992 Materials that can touch food. 
 

o

 

The manufacturer declares that the hob is built using certified 
materials and requires the appliance to be installed in 
accordance with the standards currently in force. This appliance 
must be used by a trained person for domestic purposes only. 

 

To avoid damaging your appliance 
 

o

 

The ceramic glass can be damaged by objects falling onto it.

 

 

o

 

The ceramic glass edge can be damaged by knocks from 
cookware.

 

 

o

 

Cast iron and cast aluminium cookware with damaged bases 
may scratch the ceramic surface if they are dragged across it.

 

 

o

 

Pans should be lifted on and off the hob surface and not 
dragged.

 

 

o

 

Cooking zones should not be switched on without cookware 
placed on it. Also the cookware should not be empty.

 

 

o

 

Food or liquid that has high sugar content may damage the hob 
top, if it comes into contact with the ceramic hob surface. Any 
spillages should be wiped up immediately, however this may not 
prevent the hob surface from becoming damaged. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание BACE6006






























Отзывы: