Think 3D STORMBEE S20, Руководство пользователя

Страница: 96 / 102

STORMBEE User Manual – Think 3D BVBA
Version N°1.1, last modified 30/09/2018
82
the number of scan lines (200,000) so there is only one large scan data file (per flight), which is required
for post-processing.
D.2 Switching between profiles via the scanner’s user interface
Once a helical profile has been added to your profiles list, you can switch between your standard (static
inspection) mode and the STORMBEE helical mode by simply selecting them from the profiles list
(Figure D. 2) and verify the settings of that profile (Figure D. 4 and Table 7.1). Don't forget to set a new
project name for every mission to ensure all scan files have a suitable name.
Figure D. 4 STORMBEE helical scan mode settings quick overview