ThingWorx ATrack AX-7, Руководство по установке

Страница: 8 / 12

ATrack AX-7 Protocol Adapter SDK Setup Guide
Copyright © 2015 PTC Inc. and/or Its Subsidiary Companies. All Rights Reserved.
6
Running the Protocol Adapter SDK
Before running the Protocol Adapter SDK, make sure that your ThingWorx server is running on the
configured port and address. Make sure that the ATrack device is plugged in, switched ON and it is kept
in an area with high GPS visibility (such as near a window or outside).
You may use an integrated IDE (such as Eclipse) to run the Protocol Adapter SDK, or you may compile
the source into a jar file and run it through the command prompt.
This procedure assumes you are using Eclipse IDE.
1. Import the project into your Eclipse
workspace ( File-> import-> Java->
Existing Projects… ->), browse to the
folder containing the project, and
select
Copy into workspace .
2. Configure the build path by adding the .jar files stored in the lib folder.
(Right click on your Project -> Build path -> Configure build path).
Select Add JARs in the Libraries tab.
Select all .jar files in the lib folder (Atrack->lib)