Nomad RFID Reader Setup Guide
15
GPS Settings A-GPS tab
7. Click
OK
. The Settings window displays. GPS metadata in RFID SearchLight is now
enabled. You can now restart SatViewer. Please ensure that SatViewer is
connecting on COM3.
Setting the Time Zone
WARNING
: You
must
set the local time zone before using the RFID SearchLight application.
Failure to do this could cause the device not to comply with local RF regulatory requirements.
Setting the time zone automatically sets the correct region for your location.
To set the time zone, do the following:
1. In the Start menu, click on
Settings
. This displays the Settings window.
2. Click on the
System
tab.
深圳市铨顺宏科技有限公司
http://www.fuwit.com
咨询热线：400-0581-580
