![ThingMagic Mercury 4 Скачать руководство пользователя страница 61](http://html1.mh-extra.com/html/thingmagic/mercury-4/mercury-4_user-manual_1106993061.webp)
Mounting the Reader
56
Mounting the Reader
To install the Mercury reader, use the following steps:
You can place the reader on a shelf or mount it to a wall. To mount the reader on a wall use the
following steps:
1.
Hold the reader in its mounting location and mark the position of the two mounting
screws. Minumum screw size is #12
.
2.
Drill holes for the screws and install wall anchors if necessary.
3.
Insert the screws and tighten until almost flush with the wall.
4.
Slip the reader over the screws and slide down to lock the screws in the keyhole
openings.
5.
Tighten the screws.
Содержание Mercury 4
