THEVA215-V2_216-V2_UsersGuide_Rev1.20_E
7/13
Copyright(C)
2019 THine Electronics, Inc.
THine Electronics, Inc.
Security E
HTPDN Signal Omission
HTPDN signal can be omitted by using 1k ohm resistor. When you omit the HTPDN signal, mount 1k ohm
resistors to pull down the HTPDN signal at transmitter side, and unmount the 0ohm resistors shown in
. When the HTPDN omission using, HTPDN output from receiver side is open connection.
(a)THEVA215-V2 (Top Side) (b)THEVA216-V2 (Top Side)
(c)THEVA215-V2 (Bottom Side) (d)THEVA216-V2 (Bottom Side)
Figure 13 HTPDN Signal Omission
R5:Mount(1k
Ω
)
R3:Unmount(10k
Ω
)
R7:Unmount
R2, R12:Unmount
R23:Unmount
R25, 5:Unmount
R5