© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 77 of 102
9.1 Start-Page
The start page consists of two parts. In the upper area, the current time, the date, the station
name and a green point (the green point shows you if to the logger is online, if the logger is
offline the point is orange). There are also buttons in the upper area
Figure 47: Start WEB page
The button
opens the settings menu that requires a login. The button
opens the menu
for data export (download) and the last two buttons
are used to switch the language
between German and English. The Thies logo can be seen on the far right. In the lower part,
on the left side, the current values of the data logger are shown in an overview one below the
other. To the right of this, the measured values are shown in pointer instruments.
To display further pointers, the right edge must be clicked. A blue bar with an arrow appears
(see figure above). The blue bar on the right-hand side can be used to scroll to other displays
on the right-hand side. If the left edge is clicked with the mouse, a blue bar also appears to
scroll to the left. At the end of the pages, the blue bar disappears for the page. The display of
the sensor values depends on the current configuration. There is a gray field under each
pointer instrument
, these buttons open the menus for the archive values.
status, date & time
DLU Name
buttons, Logo
Overview: name, value, unit
Pointer instruments: name, pointer, value, archive
turn the page
