30 - 66
021341/07/11
Command TO
<id>TO<para5>
Time for telegram 10 in minutes.
Description:
Setting of the time for mean and extreme calculation as well as the time
interval for automatic sending of telegram 10.
If using the automatic sending (command <id>TM00010) please consider the
following:
It makes only sense to use 1 to 6 or 10 minutes, because otherwise the time
interval is uneven. The automatic output take place at fixed times depending
on the sensor clock (e.g. <id>TO00010: output at hh:00, hh:10, hh:20, hh:30,
hh:40, hh:50).
Value range:
1...10
Initial value:
10
7.2.4 Time / Date commands
NOTE:
For the operation the setting of date and time is not necessary. The date and time
are reset when powered up, unless the UPS-input is provided. With the command
“AZ” (CH. 7.2.6) the inaccuracy of the sensor clock can be corrected.
Command ZH
<id>ZH<para5>
Setting the sensor clock (hour)
Description:
Setting the hour. The sensor time can be requested by the command „ZT“.
Value range:
0...23
Initial value:
0
Command ZM
<id>ZM<para5>
Setting the sensor clock (minute)
Beschreibung:
Setting the minute. The sensor time can be requested by the command „ZT“
Value range:
0...59
Initial value:
0
Содержание 5.4110 00 Series
Страница 65: ...65 66 021341 07 11...
