5.2.3 Mounting of the Housing Cover
Remove, first, the 4 screws in the edges. Afterwards, turn down the cover carefully.
When the housing is open, please take care that no humidity (precipitation) can lay down on the
electronics.
5.3 Electrical Installation
Attention:
The instrument must be mounted and wired only by a qualified
expert, who knows and observes the generalities of technics,
and applicable regulations and norms.
Attention:
Do not look into the invisible laser beam!
In case the laser caution labels on the housing are not legible
any more the sensor must not be operated!
Attention:
Head and carrier heatings could be hazardous hot! Burn
Hazard! (applies only for 5.4110.x1.xxx)
) has been opened, electrical connection can be carried out
according to wiring diagram (CH.
17 - 66
021341/07/11
Содержание 5.4110 00 Series
Страница 65: ...65 66 021341 07 11...