13
2-7-8 Over voltage protection indicator: (OVP)
The over voltage indicator indicates that the power inverter has shut itself down because its input
voltage exceeded 110/220VDC version. (Ref.point 2-7-1)
2-7-9 Under voltage protection indicator: (UVP)
The under voltage indicator indicates that the power inverter has shut itself down
because its input voltage fell below 110 / 220VDC. (Ref.point 2-7-1)
2-7-10 Over temp protection indicator : (OTP)
The over temp indicator indicates that the power inverter has shut itself down because its temp
has become overheated. The power inverter may overheat because it has been operated at
power levels above its rating, or because it has been installed in a location which does not allow
it to dissipate heat properly. The power inverter will automatically back up, once it has cooled off.
2-7-11 Overload protection indicator : (OLP)
The overload indicator indicates that the power inverter has shut itself down. When output
voltage over continue power, then must return to operate manually.
2-7-12 Display Instructions
A
B
C
D
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK
