7
Power cord plugs in here
Turn power on here
Set this control to match the
distance from the side of the
subwoofer to the nearest side
wall of the room (in meters).
Set this control to match the
distance from the rear of the
subwoofer to the rear wall of the
room (in meters).
This level adjustment functions
only for the LFE input.
If you
are not using the LFE input,
set this to minimum.
Connect an input cable to this
connector if the subwoofer is
being used for the processor’s
subwoofer output.
If the LFE input is used, this
connector can connect to an
additional subwoofer.
Connect an input cable to this
connector if the subwoofer
is being driven by a THIEL
passive crossover.
If the Normal input is used,
then this connector can be
used to connect to an ad-
ditional subwoofer.
DC voltage (5-25 volts) to this
jack will turn the amplifier on
if the auto/on switch is set to
auto. Removing the voltage
turns the amp off.
The On position turns the am-
plifier on provided that the main
power switch is on. The Auto
position allows the amplifier to
automatically turn on when it
detects an input or a trigger.
The 1/2 sub switch designates
how many USS subwoofers
are connected to a single passive
crossover and sets output level
accordingly.
USS SmartSub Back Panel Detail
1 Sub
2 Subs
Model
S/N
120V
CAUTION
: XLR “Normal” input is intended for use only with THIEL PXO passive
crossovers. Distorted output will result when used with XLR subwoofer outputs of
pre-amps and surround sound processors.
