5
Rear Panel Layout
2 – Rear Panel Layout showing both single and two channel modules installed
1 & 17. MAIN POWER Switches. (#17 is the Master Power Switch. Neither side of the amplifier will operate if
this switch is set to off.) #1 controls the left-hand amplifier slots and disconnects AC to all circuits. It is
recommended that this be left ON at all times during regular use with the exception of whenever cables are
connected/disconnected or when the unit will to be used for an extended period of time.
2 & 18. Rear panel FUSE. If necessary to replace, use same type and rating only.
3 & 19 IEC POWER INLETS. Attach supplied line cord to these receptacles.
4.
SINGLE ENDED (RCA) INPUT JACK
5.
INPUT SELECTOR SWITCH. Selects the single ended (RCA) or the balanced (XLR input).
6.
BALANCED (XLR) INPUT JACK.
7.
POSITIVE BINDING POST. Connects to the + (plus) speaker connector. The binding posts can accept spade
lugs, banana plugs or bare wire.
8.
NEGATIVE BINDING POST. Connects to the – (minus) speaker connector
9.
MONO AMPLIFIER MODULE. There are two single channel amplifier modules available for the Dreadnaught
D. One has a single NC-1200 N-Core amplifier card installed. The other offers bridged mono performance
using two NC-1200 N-Core cards. Please see items 10 and 11 for markings as to which is installed in your
Dreadnaught D.
10. BRIDGED MONO AMPLIFIER INDICATOR. A green mark here indicates the use of a bridged mono amplifier
module.
11. SINGLE MONO AMPLIFIER INDICATOR. A green mark here indicates the use of a mono amplifier module.
12. BLANK COVER PLATE. Used when no amplifier module is installed in the amplifier slot.
13. 120V INDICATOR. A green mark here denotes the amplifier is ready for 120 V operation.
Содержание Dreadnaught
Страница 1: ...THETA DIGITAL Dreadnaught D Owner s Manual...
