Thern 5PA5 Ensign Series, Руководство пользователя

Страница: 17 / 24

Owner's Manual for Thern 5PA5 Ensign Series Portable Davit Cranes page 17
A11577B-0613
4.1
Transporting the Crane
4.1.1
PARTIALLY DISASSEMBLE THE CRANE into components that can be
transported. Figure 10 shows a confi guration with the mast and boom se-
cured together.
4.1.2
PACK THE CRANE for transport, using the original packaging materials, if
appropriate.
4.1.3
PACK THE WINCH for transport, using the original packaging materials, if
appropriate. Please see the winch owner’s manual for instructions.
4.1.4
REASSEMBLE THE CRANE at its new location following the instructions
under Section 1.2 Assembling the Crane.
4.1.5
INSPECT THE CRANE according to the Instructions for Frequent Inspec-
tion before installing it for operation. See Section 3.4.3 Instructions for Fre-
quent Inspection.
4.2
Storing the Crane
4.2.1
PARTIALLY DISASSEMBLE THE CRANE and store all parts in a cool
clean place away from corrosive chemicals and moisture.
4.2.2
SEAL THE CRANE in plastic with a desiccant to help protect it from rust,
corrosion, and other damage.
4.2.3
SEAL THE WINCH in plastic with a desiccant to help protect it from rust,
corrosion, and other damage. Please see the winch owner’s manual for in-
structions.
4.2.4
REASSEMBLE THE CRANE at its new location according to Section 1.2
Assembling the Crane.
4.2.5
INSPECT THE CRANE according to Section 3.4.4 Instructions for Periodic
Inspection before installing it for operation.
Important!
• Keep a record of what you ship,
and when you send it.
CONFIGURATION
WITH MAST AND
BOOM SECURED.
ASSEMBLY WEIGHT
IS 58 LBS (26.3 kg).
Figure 10 – Packing the
Crane
Assembly Weight
Model 5PA5 LB KG
Mast Assembly 21 9.5
Boom Assembly 29 13.1
Boom Brace Assembly 3 1.4
Sheave Assembly 5 2.3
Handle 2 0.9
TOTAL 60 27.2
Winch (including bracket) LB KG
M1 (M4022PB-K) 19 8.6
M3 (M4042PBSS-K) 26 11.8
M2 (4WM2V-K) 42 19.0
E3 (4WP2-K) 84 38.1
Table 4 – Component Weight Chart