ThermTec CP319, Руководство пользователя

Страница: 14 / 21

Image Setting
Mode Object
mode
Especially enhance target’s detail.
It’s recommended to be used in
bad weather conditions.
WDR
mode
Gain both background and
target’s detail with wide dynamic
algorithm.
Sharpness 0-10 Adjust image sharpness to make
the image edge sharper. The
recommended value is 5.
Denoise 0-10 Adjust image noise to make the
image cleaner. The
recommended value is 5.
Brightness 1-10 Adjust image brightness to make
the image brighter. The
recommended value is 5.
Contrast 1-10 Adjust image contrast to make the
target more prominent in the
image. The recommended value
is 5.
3.4.2 System Setting
Press to enter the System Setting menu.
Select by moving the rocker button, and
short-press the rocker button to confirm the
selection.
System Setting
EIS Electronic Image
Stabilization. Can be
turned on/off in the system
setting.
Ranging AI AI distance measurement
MIL MIL distance measurement
PIP Picture-
in-
picture
In the picture, the image is
2x enlarged from the
center of the cross.
14