10
Power-Taste
LED
Kabel-Buchse
4.
Operating
Please cut carefully along the cutting line of the electric heated
insole depending on the size of the feet. The cutting line on the
insertion sole clearly indicates the appropriate size, but the tip of
the heatable insole can be cut, which does not affect the warmth
of the insole.
Insert four AA batteries each into the battery case.
*** The heating time depends on the battery selection!
For better heating performance we recommend using rechargeable
AA batteries
.
Insert the insole into the boots or shoes,
insert the plug of the cable into the
socket of the battery box. Attach the
gaiter along the lower leg and place the
battery box in the battery box bag. You
can tie the cable with the Velcro fastener.
Press the power button for approx. 2 seconds to switch on the
battery box. Then press the power button briefly (if necessary,
several times) to set the desired temperature level (1 to 2). At a
higher level the LED lights up red, at low level the LED is green
Press the power button for approx. 2 seconds to switch off the
battery box.
** The LED flashes when the capacity
of the battery / battery is too low.
Please change the battery / battery!
**
Cable tie
