Thermrad AluSoft Electric, Инструкция и руководство по установке, Страница: 6 / 11

2. PROGRAM MODE
To change the comfort and night temperature, select the comfort or night
button (MODE, second from above), then use the + and - buttons to change
the temperature parameters.
3. “FIL PILOTE” MODE
NOTE:
To change the comfort and night temperature, select the comfort or night mode
using the MODE button, then use the + and - buttons to change the temperature
parameters.
4. COMFORT MODE
5. NIGHT MODE
9 10
arrow in the top left corner. A second arrow indicates the program mode
selected.
Fil Pilote command:
1) Comfort: set point = temperature of comfort mode.
2) Nighttime reduction: set point = comfort -3.5 ° C
3) ECO1: set point = comfort -1 ° C
4) ECO2: set point = comfort -2 ° C
5) Antifreeze: Delivery point = 7 ° C
6) OFF: no temperature regulation, stand-by mode
«INSIDE» has a programmable thermostat 24 / 24h and 7/7 days,
the function is selected when the arrow relative to the clock
symbol is SHOWN (the clock is at the bottom of the screen).
In the clock section is shown the time of day while the daily program is
shown on the left of the screen.
The SET temperature is visible on the screen.
To program the thermostat, please refer to the corresponding paragraph.
In this operating mode, the thermostat regulates the temperature using
the comfort or the night reduction temperature, as programmed.
An arrow at the top of the screen indicates the actual mode
(comfort or night).
The comfort program is set when the arrow on the left
indicates the sun symbol and the comfort temperature appears
on the screen.
In this operating mode the thermostat regulates the selected
temperature.
To program the comfort temperature, use the + and - buttons.
The selected temperature is used both for the weekly program
temperature point
The night program is set when the arrow indicates the moon
symbol on the screen and the temperature for the night appears.
In this operating mode the thermostat regulates the selected
temperature.
To program the night temperature, use the + and - buttons.
The selected temperature is used both for the weekly program
as the night temperature and for Fil Pilot mode as a night
temperature point.