ThermoSphere MH-0600, Руководство пользователя

Страница: 7 / 8

HEA
TING
| W
ALL | MIRROR
7
P
I
R
ThermoSphere mirror heater requires a mains supply, marshalling
box and a switch or PIR sensor. Measure and mark out all the
necessary items before you install the electric mirror heater.
If necessary chase into the wall to accommodate fixtures and
wires.
If you are installing your mirror into a rebate within the tiles,
ensure you leave a 5mm gap around the perimeter of the mirror.
Any contact with hard materials could result in a breakage. Mirror heaters can be controlled with the ThermoSphere dual
control. Connect the mirror cold tail to the secondary relay, as
shown above.
ThermoSphere electric mirror heaters can be wired into an existing
lighting circuit using a PIR.
Remember to position the mirror heater connection box and
power cable in the closest available position to your electrical
connection to the PIR.
Wiring to a light circuit
Wiring to a PIR sensor
P
I
R
Thermomirror
Thermomirror
Light
Light
Switch
PIR
Ensure mains supply
is RCD protected
Ensure mains
supply is RCD
protected
!
!
ThermoSphere mirror heater
5mm Expansion Gap
Tiles
!