ThermoSphere HA24-100E, Инструкция по эксплуатации, Страница: 15 / 17

OPERATING INSTRUCTIONS
Note: After setting an external thermostat to control the heater, the power selection
switch on the remote will be the only working function on the heater itself.
Power indicator (amber)
Timer
button
Press these buttons to set the desired
room temperature
Caution indicator
(RED) LED
display
Fahrenheit Temp/ Celsius Temp
Control Panel
Figure 17
Instructions in Normal mode (temperature controlled by build-in thermostat)
* Power button
You can use the power button as the Power switch.
The power button is also used to change the heating output between low &
high (L/H); the LED will display “L” or “H” accordingly
Model HA24-150E: Low (L)
→
10000W; High (H)
→
15000W
Model HA24-100E: Low (L)
→
7500W; High (H)
→
10000W
*Temperature selection
Press the “
F
/
℃
” button to change the temperature displayed between Fahrenheit
and Celsius.
Press the “+” or “-” button to set the desired temperature between 5
℃
and 35
℃
.
Hold down the “+” or “-” button to speed up the selection process.
*Timer selection
Use the “Timer” button to set the operating time of your heater, from 1
hour to 24 hours.
With each press of the “Timer” button, the timer will increase by 1 hour on the
LED screen.
Ti m m e er
Po w we er r
!