manualshive.com logo in svg

ThermoSpas Atlantis Gold, Руководство пользователя, Страница: 10 / 68

Поделиться
Скачать
ThermoSpas Atlantis Gold Скачать руководство пользователя страница 10

4

Spa Safety Literature

To ensure you have a safe and enjoyable spa experience, learn all you can about spa safety and 

emergency procedures. Especially useful are the brochures listed below:

•  Children Aren’t Waterproof

•  Pool and Spa Emergency Procedures For Infants and Children

•  Layers of Protection

•  The Sensible Way to Enjoy Your Spa or Spa

The Association of Pool and Spa Professionals publishes these brochures. To acquire a bro-

chure:

•  Go to http://apsp.org

•  Conduct your own search on the Internet

•  Write to the following address:

  The Association of Pool and Spa Professionals

  2111 Eisenhower Avenue

  Alexandria VA 22314

  703.838.0083

Entrapment Risk

The Consumer Products Safety Commission/USA has reported that users of pools and spas 

have become entrapped (stuck) to drain and/or suction fittings causing death, drowning, or seri-

ous injury (see diagram below). This spa was manufactured to meet the standards and specifica-

tions outlined in the “Virginia Graeme Baker Pool and Spa Safety Act” (VGB Safety Act). Entrap-

ment risk can be minimized if proper precautions are taken.

NOTE:

 

SUCTION COVERS MUST BE REPLACED EVERY FIVE YEARS.

!

 DANGER:  RISK OF PERSONAL INJURY OR DEATH!

Never operate the spa if a suction fitting, suction cover, filter, filter lid or skimmer assembly are 

broken, damaged or missing.

!

 DANGER:  RISK OF SEVERE INJURY OR DROWNING! 

Hair entrapment

: May occur if hair is entangled, knotted or snagged in a drain suction or skim-

mer assembly. This has been reported in persons who when submerge themselves underwater, 

allowing hair to come close and/or within the reach of the suction fittings, suction covers or skim-

mer assembly.

•  Keep hair away from suction fittings, suction covers, filter, filter lid or skimmer assembly.

•  Children are at risk for hair entrapment if swimming under water.

•  Never allow children to play or get near the suction fittings, suction covers, filter, filter lid or 

skimmer assembly.

Suction Covers

Skimmer Covers

Skimmer location and ap-

pearance may vary from 

one shown

Safety Requirements

Содержание Atlantis Gold





































































Отзывы:

Нет отзывов