(847) 607-6286
www.ThermoSoft.com
•
•
1
Warnings and Operation
READ CAREFULLY – It is important to read all of the instructions before installing the
NeverFreeze® Snow Melt Systems. Installation must be performed by qualified personnel, in
accordance with local codes and manufacturers safeguards.
It is important to read the instructions carefully before installing the NeverFreeze® Heated
Rubber Mats.
•
For outdoor installation only.
•
Power supply conductor is not detachable any cannot be replaced. If the conductor
becomes damaged, the appliance itself will not continue operation. The heating mat
must be withdrawn from operation altogether. A new heating mat could give off a
specific smell which is natural for rubber. It will vanish during operation.
•
The appliance may be used by children over 8 years of age and persons with
reduced physical, sensory, or mental capabilities, or lacking experience or
knowledge, providing they are supervised, or have received instruction in safe
use of the appliance and understand the hazards. Children must not play with the
device. Cleaning and user maintenance must not be carried out by children unless
supervised.
•
From the surface of the mat, remove loose snow, ice lumps and any objects or tools
which might damage the heating mat or disturb its operation. The heating mat must
not be positioned in the vicinity of hot or flammable substances. Damaged heating
mat must not be used or connected to the mains.
•
Every application of the heating mat must be preceded with a detailed visual
inspection and test of the electrical parameters of the appliance. In case more than
one heating mat be used, the mats must not overlap or cover one another.
•
Do not use any additional thermal insulation with the heating mat due to existing risk
of overheating.
•
Do not let the heating mat come into contact with insulation materials.
•
Do not cover the heating mat while using it.
•
Do not place any sharp-edged tools on the heating mat, which might damage the
mat.
•
Do not connect to the mains the heating mats which are folded or rolled.
•
Do not use the rubber heated mat at a higher ambient temperature than + 10°C.
•
The load class is 33-34 Commercial (persons and light duty trolleys with rubber
wheels) The power lead may be extended or cut shorter if required but must never
be removed from the heating cable.
Important
Important