T9901125-1-1 UK
Page | 5
Table 1
3.3 Remote
Control
Settings
On the back of the PCB inside the Ecopower/Ecopower Plus
Remote Control you will find four DIP switches (see Fig 6) that
provide optional features detailed in Table 1 below.
DIP
Feature
Explanation
Default
Notes
1
Reset on power-up
On restoring power after an
electrical interruption all Remote
Control settings are retained
ON
WARNING!
– Fans start
on their own after power
is restored
2
Stop fan on cold
Fans are switched off when
heating level is achieved (AUTO
mode only)
OFF
3
Never blow cold
Air curtain always heats in
AUTO mode
OFF
Will not go to ambient
mode
4 Room
air
temperature control
Enables the room air sensor in
the Remote Control
OFF
Disables all other
temperature sensors
4.1 Remote
Control
Switch
(for Ambient units)
1 On/Off
Turns the air curtain fans On or Off.
2, 3 & 4 Fan speed
Switch fan speed between Low, Medium and High respectively.
4.
REMOTE CONTROL OPERATION
1
2
4
3
Fig 6
