30
No sparks
appear at any
electrodes
when ignition
button is
pushed; no
noise can be
heard from
spark module.
No sparks
appear at any
electrodes
when ignition
switch is
pushed; noise
can be heard
from spark
module.
Troubleshooting - Electronic Ignition System
Battery not installed
properly.
Dead battery.
Button assembly not
installed properly.
Faulty spark
module.
Output lead
connections not
complete.
Check battery
orientation.
Has battery been
used previously?
Check to insure
threads are properly
engaged. Button
should travel up and
down without
binding.
If no sparks are
generated with new
battery and good
wire connections,
module is faulty.
Are output
connections on and
tight?
Install battery (make sure
that "+" and "–" connectors
are oriented correctly, with
"+" end down and "–" end
up.)
Replace battery with new
AAA-size alkaline battery.
Unscrew button cap
assembly and reinstall,
making sure threads are
aligned and engaged fully.
Replace spark module
assembly.
Remove and reconnect all
output connections at
module and electrodes.
Problem
Possible Cause
Check Procedure Solution
Storing Your Grill
• Clean cooking grate(s) and discard old briquets.
• Store in dry location.
• When LP tank is connected to grill, store outdoors in well-ventilated space and out of reach
of children.
• Cover grill if stored outdoors. Choose from a variety of grill covers offered by Char-Broil.
• Store grill indoors ONLY if LP tank is turned off and disconnected, removed from grill and
stored outdoors.
• When removing grill from storage follow "Cleaning Burner Assembly" instructions before
starting grill.
