Before assembly, inspect regulator
for damage, dirt or debris
accumulation. Clean out if present.
With knob
, insert regulator/valve into end of
burner.
Once regulator/valve has
burner, turn
regulator/valve
to lock in position with knob
(J)
pointing down
Notch in regulator/valve MUST engage dimple in end of
burner.
completely engaged
g
n
i
t
n
i
o
p
e
s
i
w
k
c
o
l
c
up.
5
Remove cap from end of propane cylinder (sold separately).
Cap should be kept on cylinder when not in use to prevent dirt
and debris from entering regulator/valve. Check end of cylinder
attachment for dirt and debris. Clean out if necessary.
Insert threaded end of cylinder into regulator/valve and hand
tighten.
Overtightening can damage threads
on regulator/valve.
Do not use tools!
Perform a leak test.
6
Propane cylinder
(not included)
(J) Regulator/Valve
