THERMOROSSI KOKKOLA, Руководство пользователя

Страница: 17 / 49

Manuale d'installazione, uso e manutenzione
PKOKKOLAPLUS – PMOODPLUS
Displays the preset combustion power , and consequently the pellet consumption , by the number of bars that are
lit up around the flame symbol, using this logic:
One bar lit up: Minimum combustion power (and therefore with minimum pellet consumption)
Two bars lit: Second combustion power
Three bars lit: Third combustion power
Four bars lit: Fourth combustion power
Five bars lit up:
Maximum combustion power (and therefore with maximum pellet consumption)
No bars lit up: The appliance is OFF
Displays the preset
ventilation power
, and consequently the room fan speed
,
by the number of bars that are lit
up around the fan symbol, using this logic:
One bar lit : Minimum ventilation power
Two bars lit: Second ventilation power
Three bars lit: Third ventilation power
Four bars lit: Fourth ventilation power
Five bars lit: Fifth ventilation power
Six bars lit : Maximum ventilation power
Dashes appear along the top of the display, and each dash corresponds to one day of the week set by the user
(e.g. 1 corresponds to Monday, 2 corresponds to Tuesday… etc.).
The operating status of the appliance appears below these dashes, that is START, OFF or WORK. And the
current time set by the user appears below this word.
The presence in the display of the clock symbol indicates that the CHRONO programming has been enabled; if
this symbol does not appear it means that the CHRONO programming has been disabled. (see para. 5.4)
5.2 DESCRIPTION OF THE POWER PANEL
The components of the power board are described below:
1) Electrical power outlet 220V-240V 50Hz
2) Main switch 0/I.
3) Test light for pellet feed motor.
The light comes on simultaneously with the activation of the pellet
feed motor.
4) Cap for reset thermostat button.
If the reset thermostat overheats stop the pellet feeder. The appliance
must cool down before you can restart the appliance. After verifying
and eliminating the causes of the event, undo the protective cap and
press the button.
5) Protection fuse 3.15 A.
5.3 DATE/TIME: SETTING THE DATE AND TIME
The appliance must be energised and the I/0 switch in position “I".
The current date and time can be set using the DATE/TIME function.
To set the current time and date proceed as follows:
1) Press the Menu Button once to view the following screen:
2) After a few seconds the following screen will appear on the display:
Key: Key:
RESET RESET
GEAR MOTOR INDICATOR GEARMOTOR INDICATOR
3
4
2
1
5