Thermoreg TI 970, Руководство пользователя, Страница: 31 / 56

ENGLISH
3.1 MAIN DISPLAY
Information shown on the main display are:
1. Date
2. Heating switched
3. Mode (unless LP mode is activated)
4. Time
5. ECO mode indication leaf
6. Set temp or actual temp (Room or floor)
3.1.1 SWITCHING THERMOSTAT OFF/ON
Thermostat and heating can be switched OFF and ON by pressing and holding
center-button for 3 seconds. User is prompted for accepting or cancelling switch
OFF command.
3.1.2 CHILD SAFETY LOCK
Child Safety Lock can only be activated from main display. When the child safety
lock is ON, the settings of the thermostat cannot be changed, nor set temperature
or power regulation value. The child safety lock is locked/unlocked by pressing and
holding both arrow buttons simultaneously for 3 seconds.
3.2 SETUP AND DEFAULT SETTINGS
After connecting the power to the thermostat for the first time, or after performing a
factory reset, a Start-up Wizard will prompt the following settings:
• Language
• Date in format: YYYY.MM.DD
• Floor type: wooden or concrete (floor sensor needs to be connected)
• Regulation type: Floor, Air or power regulation
• Sensor type: 10k Ω , Thermoreg (default 12k Ω ), 15k Ω , 22k Ω , 33k Ω or 47k Ω
(floor sensor needs to be connected)
• Desired temperature of the floor or air or power regulation value
(depending on selected mode)
You can change these settings later on under “Settings” in the main menu. Floor,
regulation and sensor type can be changed under “Controller wizard” under
“Settings” in the main menu.