Thermor Evidence3, Инструкция по установке и эксплуатации

Страница: 3 / 8

Utilsation
2.1 Description of the control unit
1.3 HOW TO INSTALL THE DEVICE?
1.3.1 Mobile installation
- The mobile installation with feet must be positioned on a horizontal
surface. Refer to the instruction of the feet kits.
- Do not use this heater near a bathtub, a shower or a pool.
- Do not use this heater in small spaces when they are occupied by
people who are unable to leave the room by themselves unless constant
supervision is provided.
1.3.2 Wall installation
- Release the appliance’s hook-on bracket
1.3.3 Fix the hook-on bracket
- Use the wall-mouting bracket as a template for positioning the heater
Drilling points A
Drilling points B
1.3.4 Connceting the panel heater
- Refer toe the instruction
- The appliance should have a 220v/60Hz power supply
- In humid areas such as bathrooms and kitchens the power socket must be
installed at least 25 cm above the floor.
1.3.5 Lock the appliance on the hook-on bracket
Place the device on inclined supports c, rotates the device to put it on the
supports D. Lower the device on he attachment Iug. A click indicates that the
unit is attached and locked. To unlock the attachment lug,grab a screwdriver
and push the tab (at the top left of the attachment lug behind the unit) to the
wall. Lift the unit while holding the tab with the screwdriver. Tilt it forward and
remove the supports C.
2.2 Fixing the comfort temperature
- The comfort temperature is the temperature that you would like while the
room is occupied.
- The comfort mode allows you to adjust the temperature set to the tempera-
ture needed.
- Set the switch H on and adjust the knob on the desired position,the
heating indicator G lights if the ambient temperature is lower than desired
.wating until the temperature stabilizes.