20
Installation manual: Use
2SHUDWLQJPRGHVHWWLQJ
• Press
to select the operating mode.
3DUDPHWHUVHWWLQJ
For the
,
and
SDUDPHWHUV
• Press
SET
until you reach the desired parameter, then select the value using the
and
keys.
• The appliance will exit
SET
mode after 5 seconds without any activity on the remote control.
Parameters
to
are provided for information purposes only.
3.7. Clock mode:
It is possible to program up to 2 operating time frames for your Aéromax Piscine on your remote control.
• Press and hold
for 5 seconds until
ÁDVKHV
6HWWKHKRXUVDQGPLQXWHVIRUWKHVWDUWRIWKHÀUVWWLPHIUDPHXVLQJ
and
.
• Press
until
ÁDVKHV
6HWWKHKRXUVDQGPLQXWHVIRUWKHHQGRIWKHÀUVWWLPHIUDPHXVLQJ
and
.
• Press
.
<RXKDYHWKHRSWLRQRI
• Setting the 2
nd
time frame following the same procedure.
&RQÀUPLQJE\OHDYLQJWKHKRXUVDQGPLQXWHVDW]HURRQWKH
nd
time frame.
,QIRUPDWLYHRSHUDWLQJYDOXHV
If the Aéromax Piscine is running, pressing
and
HQDEOHV\RXWRYLHZRSHUDWLQJWHPSHUDWXUHGDWD
• the exchanger's inlet temperature
IN
and outlet temperature
OUT
.
• the evaporator temperature P1.
• temperature P2 (not used).
• the outdoor temperature
ROOM
.
AUTO mode
HQDEOHVDXWRPDWLFKHDWLQJDQGFRROLQJRIWKHZDWHU
7KLVRSHUDWLQJPRGHPD\EHXVHIXOLQFDVHRIDKLJKRXWGRRUWHPSHUDWXUH
to keep the pool water at the desired temperature.
