![Thermoptek FireAngel ST-625 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/thermoptek/fireangel-st-625/fireangel-st-625_user-manual_1106001013.webp)
13
.
.
.
.
TROUBLESHOOTING
Problem
Solution
Your FireAngel
®
smoke
alarm does not sound
during testing
• If testing immediately after first activating the alarm
or replacing the batteries, you should allow a few
seconds for the alarm to settle before testing.
• Make sure you push the centre of the test button
firmly.
• If the unit has been silenced and is in low sensitivity
mode it may not test. Wait 15 minutes then try again.
• If the alarm has been recently fitted and it still fails to
self test then contact Technical Support on:
0800 141
2561
or e-mail:
.
Your FireAngel
®
smoke
alarm chirps intermittently
• Check the location of your smoke alarm (see
‘Application’).
• Check that your smoke alarm is definitely the source
of chirping; make sure the noise isn’t coming from
another alarm by process of elimination.
• If in doubt, contact Technical Support on:
0800 141
2561
or e-mail:
.
Your FireAngel
®
smoke
alarm activates when no
smoke is visible
• Check the location of your smoke alarm (see
‘Application’).
• Clean the smoke alarm (see ‘Maintenance’).
Содержание FireAngel ST-625
Страница 1: ...User Manual Smoke Alarm Model ST 625...
Страница 16: ......