Thermoplan BLACK&WHITE 3 FOX2, Техническое руководство, Страница: 8 / 11

REV-0
6.8
© 2010 Thermoplan AG, Subject to change
SECTION 6
Technical Manual
User messages
Text message Reason / solution
j.
Ready
• Coffee machine is ready
k.
Please wait
while heating up
• Coffee boiler has not reached set temperature
– Allow machine to heat about four minutes.
• High limit switches have tripped
– Reset the high limit switches by firmly pushing them in. You must hear a click.
• Bad heating element
– Check boiler heating
• Change hydraulic module
l.
Fill hopper M1
(left)
Fill hopper M2
(right)
• Bean hopper out of beans or hopper gate closed
– Behälter füllen oder verriegeln
• Bean hopper or grinder outlet is obstructed
– Remove bean hopper and clear obstruction
• Defective 24V piston motor
• Defective grinder motor or capacitor
• Toothed belt or pulley is loose
– check
• Change mechanic module
m.
Bean hopper missing
or command unit up
• Bean hopper or command unit not correctly mounted
– Lift command unit up and check the lever of the bean hopper
– Close command unit (snaps in audibly)
• Defective solenoid switch of command unit or bean hopper
– Check solenoid switches
n.
Please
clean unit
• No cleaning was performed since 24 hours
– Perform daily cleaning