10
For more information about our products and how to contact us, please visit thermopatch.com
The closing and opening speed of the press arm can be adjusted by means of two throttle valves. The
access these, the back platen of the machine has to be removed. One valve is for setting the opening
speed, the other is for setting the closing speed.
By carefully adjusting the required changes in speed can be set.
• Before adjusting, loosen the lock nut on the valve and tighten again after adjusting of the setting.
• By turning the turning knob of the valve clockwise of the concerning throttle valve clock wise, or counter
clockwise, the press arm will open faster, or slower.
WARNING!
Remove the plug from the wall socket before removing any screws and housing parts.
