Holiday (Manual)
Keep a constant temperature up to the day of return from the vacation,
then switch to the MANUAL mode (the last selected program before
departure). It is not possible to set the Summer mode (setting values,
constant No. 4!
Press the “ “ button to select
Holiday (Manual)
, confirm
by “ “ button. Use the similar setting as in Auto mode. After
expiration of the set period of vacation, the thermostat returns to
the manual mode.
DHW is always disconnected
.
Main menu
Setting
Pr
ogr
amming and
setting par
amet
e
rs
Setting clock
setting the actual time and date.
Setting program
(factory setting prog:1)
Setting programs for CH and DHW.
The thermostat can set 9 weekly programs for heaiting and 6
thermal changes per day. Programs No. 8 and 9 are designed
for automatic changes in even and odd weeks.
During selection of permanent CH temperature (4. Regulation
mode “3“ Permanent CH temperature) output temperature from
the boiler or the cascade is always set.
Press the “ “ button, by turning ” “ select the mode
Setting clock
, confirm by “ “ button. Turn the “ “ to
change the values and confirm the selected values by pressing
” “ button
(Symbols above the set parameter always
flash. Turn “
“ to browse between data, press the but
ton “ “ to return to menu).
Press the “ “, button and turn the” “ to select
Setting program
mode, confirm by “ “. Turn the
“ “ to select the program and confirm by ” “
button. Select the requested day in the same manner.
First, select the time of the change and then the
requested room temperature. Proceed in such manner
up to the last terminal. If you know that the following day
will be the same, press the button “
COPY
“. The
program is copied. The text “
COPY
“ flashes on the
right upper side
(the set data always flashes, turn the “ “ button
to browse between the data, press the” “ button to
go back one step back in programming).
When programming DHW, proceed in a similar manner, set
the time sections for the heating of DHW.
Program CH
Program DHW*
*
Control DHW: When connecting an external sensor (see diagram on page 2), No.17 constant setting to "for DHW" and
location of the sensor in the tank, there is regulation DHW according to set program (with a hysteresis of ± 5 ° C according
to location of the sensor in the tank).
Parameters
Setting the regulation parameters and the heating system.
2. Min. program. temper.
(factory setting 5°C)
Temperature limit - it is not possible to set the room
temperature below this limit when programming.
Select within the range from
2 °C to 10°C (by 0.5°C).
3. Max. program. temper.
(factory setting 39°C)
Temperature limit - it is not possible to set the room
temperature above this limit when programming.
Select within the range from
15 °C to 39°C (by 0.5°C).
4. Mode
(factory setting 0)
Status of the mode in which the thermostat will work.
0 - Required temper.regulation,
the thermo-
stat heats for requested temp. at the stated time.
1 - Premature switching (PS),
during two day of opera
tion, the thermostat ascertains thermal constants
of the reference room and then switches the
heating with requested advance (for restriction of
advance, see constant No. 5 below).
2 - Summer mode,
the thermostat does not heat,
only controls the heating of DHW.
3 - Permanent temp. CH,
the thermostat keeps
temperature of heating water within the limits of the set
time and the constant 6 (MIN. TEMP. CH) and 7 (MAX.
TEMP. CH).
5. Start-up sooner max.
(factory setting 2 hours)
When
PS is activated
! The thermostat may
activate the heating at the set number of hours in
advance.
Optional range
0.5 to 6.0 hours (by 0.5 hours).
Press the “ “ button, by turning the button ” “ select the
Parameters
mode. Confirm by pressing the “ “.
Turn the “ “ button to browse through the constants.
Turn the “ “ button to set the minimum adjustable
temperature and confirm with ” “ button.
Constant No. 3 automatically appears.
Turn the “ “ button to set maximum adjustable
temperature and confirm with ” “ button.
Constant No. 4 automatically appears.
Turn the “ “ set the maximum time in hours to show
the time in advance it is possible to activate the heating
so that the temperature reaches the requested value by
the stated time. Confirm by ” “ button.
Constant No. 6 automatically appears.
Constants
1. Cesky
(factory setting Cesky)
Selection of language.
Turn the “ “ to select and press the ” “ button.
Constant No. 2 automatically appears.
3
Select program
Program: > 1
<
Monday
1.
6:00
22.0°C
2.
9:00
19.0°C
3.
14:00
22.0°C
4.
16:30
24.0°C
5.
21:30
19.0°C
6.
21:30
19.0°C
Select program
Program: > DHW <
Monday
1.
0
-
24
45.0°C
2.
24
-
24
45.0°C
3.
24
-
24
45.0°C
The last program is reserved for the management of DHW. For
boilers with flow heating, it is possible to set 3 time sections with
various temperatures (from 35 °C to 60 °C ). For boilers with
tanks, the temperature of DHW is set on the boiler and on
PT59X ; setting the temperature only enables activation of the
boiler for heating the boiler.
Turn the “ “ button to select the required regulation
mode and confirm with ” “ button.
In the case of selection of the
mode “ 0 ”
the constant No. 5
is skipped and the constant No. 6 is immediately appeared.
In the case of selection of
mode “1“
, constant No.5 auto-
matically appears
(in the list of information , the text
“required temperature in premature switching“ appears).
In the case of selection of
mode “2”
, constant No. 5 is
skipped and constant No. 6 immediately appears
(on the
introductory screen the text “Summer mode” appears).
I
n the case of selection of the
mode “3“
the constant No. 5
is skipped and the constant No.6 is immediately appeared.
On the introductory screen the text “required IN“ and at this
mode the stated actual value of required-permanent
temperature of heating watter is appeared.