INSTALLATION INSTRUCTIONS
BALANCING VALVES WITH PROPRESS FITTINGS
CSUA-PP & CSUAS-PP
353 Ivyland Road • Warminster, PA 18974-2205 • Phone: 1-877-379-8258 • CircuitSolver.com
Buy American to Build America®
Embrace the Technology
®
MULTI-BRANCH PARALLEL
PIPING CIRCUIT:
1) Install assembly with proper flow direction as marked on valve body. This is critical with CircuitSolver® Union
Assemblies that have an integrated check valve.
2a) Use suitable pipe thread sealant rated for domestic water applications on all male pipe threads; if using PTFE
sealant tape, make sure not to apply tape to the first thread to avoid cutting the PTFE tape and causing potential
obstructions to flow.
2b)
How to apply PTFE Tape:
1. Clean the male and female threads of any oil or dirt.
2. Apply tape to the male threaded end in a clockwise direction starting one thread back from the end.
Hold on to one end of the tape, and wrap the threads three to six times, keeping it tight.
3. Once the threads are completely wrapped, grab the tape with your thumb and index finger and snap it off.
NOTE:
Upon tightening the assembly, verify that the shutoff valves are oriented so that their handles are accessible
and can be operated fully without obstruction. If a reorientation after final installation is needed, loosen the
CircuitSolver®
Union Nut to rotate the section so as to not disturb the tightened components and possibly cause a
leaky connection.
3) When using Viega ProPress® adapters (CircuitSolver Models
ending in -PP), please consult the Viega ProPress Installation Manual
for proper installation, tools, etc.
Visit
https://www.viega.us/en/products/ProPress/Downloads.html
4)
CircuitSolver®
Union Assemblies are designed to be installed
at the end of each domestic hot water supply just prior to the
return line. See diagram to the right.
5) For water systems with particulate/dirt problems,
consider using a strainer if one is not already used upstream.
*Strainer must be maintained in order to avoid flow obstruction.
6) A convenient drain port allows for the system branch to be
flushed without disconnecting plumbing lines.
Scan to watch a quick tutorial video
on proper reorientation instructions.
