Thermokon STC65 RS485 Modbus, Техническое описание, Страница: 3 / 4

Issue Date: 18.01.2016 Page 3 / 4
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Germany · tel: +49 2778 6960-0 · fax: -400 · www.thermokon.de · email@thermokon.de
STC65-RS485_Modbus_Datasheet_en-us
.docx
© 2016
C
onfiguration
DIP 1
DIP 1.1 DIP 1.2 DIP 1.3 DIP 1.4 DIP 1.5 DIP 1.6 DIP 1.7 DIP 1.8 Address
ON OFF OFF OFF OFF OFF OFF OFF 1 (default)
OFF ON OFF OFF OFF OFF OFF OFF 2
ON ON OFF OFF OFF OFF OFF OFF 3
… … … … … … … … …
ON ON ON ON OFF OFF OFF OFF 15
… … … … … … … … …
ON ON ON OFF ON ON ON ON 247
LED
Designation Description
LED 1 PWR Power supply OK
LED permanently ON
→ compatibility mode ON (DIP 2.6 = OFF | 32RX, 8TX)
LED flashes
→ compatibility mode OFF (DIP 2.6 = ON | 32RX, 32TX, 32VA)
LED 2 BUS Indicator RS485 traffic
LED 3 RAD Indicator EnOcean traffic
LED 4 ERR Indicator for error notification
When using ASCII mode,
the parity must be set to EVEN or ODD. „No Parity“ (no) is not available in ASCII mode.
The configuration software and more information about the parameter of the STC65-RS485 Modbus,
please download from the following link.
http://www.thermokon.de/download-archive/EasySens%20-%20Empf%C3%A4nger/Gateways/
STC65-RS485%20MODBUS/Software/STC65-RS485_Modbus.zip