19
DE
GB
A5.
L
N
1
2
5.
A6.
2
3
1
INLET
OUTLET
6.
1. Switch off the power supply and prepare the power cable as shown in
A1
.
2. Attach the bracket to the wall with two screws as shown in
A2
.
3. Loosen the device screws on both sides and remove the cover as
shown in
A3
.
4. The left outlet of the device is the water inlet (cold / blue), the right
outlet is the water outlet (hot / red). Push the mini instantaneous wa-
ter heater towards the bracket until you hear a “click”, as shown in
A4
.
5. Connect your device to your main water supply using the diagram.
Make sure that the main water supply is turned off.
6. Open the main water supply and check for leaks, bleed the system by
opening the hot water tap.
7. When all air has escaped from the system, prepare the electrical con-
nections for the device as shown in
A5
. Make sure that the main pow-
er supply is switched off.
8. Attach the cover to the water heater and tighten the screws on both
sides as shown in
A6
.
9. Switch on the main power supply.
10. Device should work now!
The device must be properly earthed.
（3.25改字体）Manual iwh mini elex v2（2021.03.24改）.indd 19
（3.25改字体）Manual iwh mini elex v2（2021.03.24改）.indd 19
2021/3/26 15:34:57
2021/3/26 15:34:57
