ThermoFisher Scientific Vanquish VC-D11, Руководство по эксплуатации, Страница: 149 / 192

7 • Maintenance and Service
Diode Array/Multiple-Wavelength Detectors (VC-D11, VC-D12, VF-D11)
Operating Manual Page 149
4. Remove the flow cell from the device and store it in its packaging.
Ensure that you install the flow cell cover to the flow cell opening.
Flow cells must be shipped in their original packaging.
NOTICE
The flow cell opening on the device is sensitive to dust and debris.
If no flow cell is installed to the device, close the flow cell opening with
the cover for the flow cell opening.
5. Remove the device or slide-in module from the system stack as
required:
Install the carrying handles and remove the device from the
Vanquish system. Follow the instructions on dismounting the system
stack in the
Transporting or Shipping the System section of the
Vanquish System Operating Manual .
‑or‑
Remove the slide-in module from the device enclosure in the system
stack (see
Removing the Slide-In Module ( } page 152) ).
6. The step depends as follows:
¨
To transport the device to a new location, follow the instructions
in
Transporting the Device to a New Location ( } page 149) .
¨
To ship the device, follow the instructions in Shipping the Device
( } page 150) .
See also
2
Removing the Flow Cell (
}
page 134)
7.13.2 Transporting the Device to a New Location
Preparations
Prepare the device for transport. See Preparing the Device for Transport
( } page 148) .
Follow these steps
1. Observe the notes for handling and lifting the device safely.
2. Transport the device to the new location.
3. Install and set up the device in the system stack. Follow the
instructions on mounting the system stack in the Vanquish System
Operating Manual .